WARNING:
LED WORKLIGHT
Pressing the trigger switch illuminates the
LED worklight, located on the front of the
hammer drill. This feature provides extra
light for increased visibility.
RATCHETING KEYLESS CHUCK
The keyless chuck allows you to
hand-tighten or release the drill bit in
the chuck jaws. The ratcheting feature
is designed to prevent the chuck from
opening during operation.
TWO-SPEED GEAR BOX
The two-speed gear box is designed for
drilling or driving at LO or HI speeds.
A slide switch is located on the top of
your hammer drill for selecting the
appropriate speed.
VARIABLE SPEED
The variable-speed trigger switch delivers
higher speed with increased trigger
pressure and lower speed with decreased
trigger pressure.
Page 8
SPECIFICATIONS
The safe use of this
product requires an understanding of the
information included on the tool and in
this operator’s manual, as well as
knowledge of the project you are
attempting. Before using this product,
familiarize yourself with all operating
features and safety rules.
ADJUSTABLE TORQUE
The hammer drill has 24 screw-driving
positions.
FORWARD/CENTER LOCK/REVERSE
The direction-of-rotation selector located
above the trigger switch changes the
direction of the bit rotation. Setting the
trigger switch in the OFF (center lock)
position helps to reduce the possibility of
accidental starting when not in use.
ASSEMBLY
WARNING:
If any part is broken or
missing, DO NOT attempt to plug in the
power cord, attach the battery or operate
the hammer drill until the broken or
missing part is replaced. Failure to do so
could result in possible serious injury.
WARNING:
Do not attempt to
modify this hammer drill or create
accessories not recommended for use
with this hammer drill. Any such alteration
or modification is misuse and could result
in a hazardous condition leading to
possible serious injury.
WARNING:
To prevent accidental
starting that could cause serious personal
injury, always remove the battery pack
from the hammer drill when assembling
parts.
CONTENTS
Hammer drill, double ended bit, auxiliary
handle and Operator’s Manual.
UNPACKING
This product has been shipped completely
assembled.
1. Carefully remove the tool and any
accessories from the box. Make sure
that all of the items listed in the
packing list are included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
(16 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce